My Account | Login | Checkout

You are not logged in

Enter the search term for the product you are looking for below:

More Options
Display my previous orders

To repeat a previous order in part or full, click the link above. To purchase or view any of the items you have purchased before, simply select it from the list below.


12 Volt, 440 Amp Relay - Includes capacitor & resistor.
Ametek SBD-4201-G (15-386) Silver contact solenoid.
12 Volt, high amperage continuous duty relay.

SBD-4201-G-2.2

Available in increments of 1
Quantity
Total Percent Off Per Unit
1
$54.36 0% $54.3600
2
$103.28 5% $51.6420
5
$244.62 10% $48.9240
$462.06 15% $46.2060
$869.76 20% $43.4880


ColemanAir

Replacement solenoid for C440-HVA, C440-HVM, C440-MMC

Can also be used with the CKit board or C40.




This is the genuine Ametek SBD-4201-G with silver contacts and silver disc.

This solenoid is rated at a full 200 amps continuous on the N.O. (diversion) contacts with a 900 AMP MAKE (engage) and 300 AMP break (disengage) rating.

We have tested this solenoid at more than 440 AMPS of diversion (using approximately a 40-50% duty cycle) with no issues. (Please click here to see our testing results.)

The N.C. contacts are rated at 150 amps continuous, with a 400 amp make and 150 break. (See chart below)

This is TWICE the rated capacity of the copper versions by this manufacture and other vendors compatible copper based products.

Don't be fooled by lower priced copper based models, they handle half the current and can wear out quickly!






CURRENT RATINGS for Ametek Solenoid








Cross reference:

Solenoid Switch Cole Hersee # 24401, 24401BX Prestolite # 15-323




We include a 2.2K resistor and 100uf/100v Capacitor that are put in parallel with the normally closed contacts. This combination called a "Snubber" helps reduce contact arching and can greatly increase the life of the solenoid.



  • Circuitry DPST
  • Coil voltage 12V
  • Contacts SILVER
  • Inner movable disc SILVER
  • Terminals copper; 10-32 thread and 5/16"-24 thread. Hex nuts and lock washers included
  • Housing plated steel

Here are some of the most common ways to wire the relay using our controller as an example. -- Click the image to enlarge

24v Standard Diversion48v Standard Diversion12v Disconnect Controller24v Disconnect Controller

If you have any questions, please do not hesitate to ask, we are happy to help.


Customers who bought this item also bought

Controller repair, flat rate cost
Flat rate repair cost for any of the Coleman Air Controllers and meters
$50.00 plus shipping (For Controllers and other larger items).

click to see more

C440 HVAD Main Board
C440-HVAD  Main (Mother Board) PCBC

click to see more




Featured videos

Coleman Air Products

Copyright 2010-2017 Coleman Air, Inc. All rights reserved.

Have Questions? -- Please call us at 1-800-577-4169


We verify orders.

In addition to standard credit card verification procedures which insure the credit card is not stolen, we also verify the computer IP address, phone numbers, etc., to ensure the person placing the order is not doing so for fraudulent purposes. We work with all applicable agencies to prevent and/or report fraudulent or suspicious activity.

Official PayPal Seal